"That's it, go ahead and run. Run home and cry to mama! " ~ Ash, Army of Darkness
 | SAN FRANCISCO BAY Hatch BRINE SHRIMP EGGS 2.75 OZ
Brand: SAN FRANCISCO BAY BRAND INC. Part Number: SAN65032
The finest brine shrimp eggs, harvested from an FDA approved solar salt pond in the San Francisco Bay area, rich in algae and diatoms. Hatch your very own highly nutritious fish food! | *$19.99 |
 | Seaweed Salad Green Algae - 100 Sheets
Brand: SAN FRANCISCO BAY BRAND INC. Part Number: 75100
100 percent all natural seaweed, the perfect dietary addition to your herbivorous fishes' meal time! Recommended for saltwater and freshwater fish such as: Tangs, damsels, angels, plecos, silver dollars, African cichlids, pacus, etc. | *$29.99 |
 | SAN FRANCISCO BAY BACTERIA FREEZE DRIED TUBIFEX WORMS 2 OZ
Brand: SAN FRANCISCO BAY COMPANY Part Number: SAN71520
Gamma radiated to have all the benefits without all the diseases tubifex worms are known for. These are cubes. | *$9.20 |
 | Scott Nylon Adjustable Collar Large Blue
Brand: Scott Pet Products
Nylon adjustable collar large blue | *$7.39 |
| Scott Nylon Adjustable Collar X Large Red
Brand: Scott Pet Products
Nylon adjustable collar x large red | *$8.99 |
 | Scott Nylon Sp Lead 3 - 8 X 4 Red
Brand: Scott Pet Products
Nylon sp lead 3/8 x 4 red | *$4.39 |
 | Million Bubble Pump Sea-Monkeys
Brand: Sea-Monkeys Part Number: MBP1
Hand held pump to make tons of bubbles to offer your sea-pets oxygen
Produced by the Sea-Monkey company | *$6.99 |
 | Acid Buffer - 2.2 lb. - 1 kg
Brand: Seachem Part Number: 247
Acid Buffer is a non-phosphate buffer that lowers pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water, where phosphate buffers may pose an algae or cloudiness problem. Acid buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (kH) into available CO2. Treats up to 16,960 gallons of water. | *$18.69 |
 | CLARITY CONDITIONER 100ML
Brand: Seachem Part Number: 145
Seachem Clarity 100Ml | *$3.44 |
 | Denitrate 1L (34 oz)
Brand: Seachem Part Number: 137
DeNitrate removes nitrates, nitrites, ammonia, and organics from both fresh and marine water. The high porosity of DeNitrate supports the growth of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts. Even when exhausted, DeNitrate continues to be an excellent support for the biological filter and does not have to be removed. 1 liter treats 50-100 gallons. | *$7.75 |
 | GarlicGuard 17oz/500mL
Brand: Seachem Part Number: SC173
GarlicGuard is an appetite/flavor enhancer for freshwater and saltwater fish. GarlicGuard will help renew the interest of poor or finicky eaters. Contains the naturally derived, active ingredients found in garlic, allicin, which has been demonstrated to posses health promoting benefits. Allicin possess strong anti-oxidant properties (similar to vitamin C) which promotes enhanced health through elimination of dangerous free radicals. For enhanced health benefits, garlic guard also contains vitamin C. | *$8.79 |
 | PARAGUARD 250 ML
Brand: Seachem Part Number: 606
Eliminates parasites and kills fungus and bacteria in all aquariums. Use in hospital or quarantine tanks and when adding new fish to your aquarium. A 10% blend of aldehydes with a synergistic concentration of malachite green and fish protecting polymers. | *$6.06 |
 | Purigen 1000ml (34 oz)
Brand: Seachem Part Number: 167
Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique synthetic that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others. Purigen controls ammonia, nitrites, and nitrates by removing waste that would otherwise release these harmful compounds. Purigen's impact on trace elements is minimal. It significantly raises redox and polishes water to unparalleled clarity. Like HyperSorb, Purigen darkens progressively as it exhausts, and is easily renewed by treating with household bleach. Purigen is designed for both marine and freshwater use. A 100 mL bag of Purigen purifies and polishes up to 100 gallons of water for up to six months. | *$48.99 |
 | Purigen 100mL
Brand: Seachem Part Number: 165
Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique synthetic that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others. Purigen controls ammonia, nitrites, and nitrates by removing waste that would otherwise release these harmful compounds. Purigen's impact on trace elements is minimal. It significantly raises redox and polishes water to unparalleled clarity. Like HyperSorb, Purigen darkens progressively as it exhausts, and is easily renewed by treating with household bleach. Purigen is designed for both marine and freshwater use. A 100 mL bag of Purigen purifies and polishes up to 100 gallons of water for up to six months. | *$6.89 |
| Purigen 250ml (8.5 oz)
Brand: Seachem Part Number: 166
Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique synthetic that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others. Purigen controls ammonia, nitrites, and nitrates by removing waste that would otherwise release these harmful compounds. Purigen's impact on trace elements is minimal. It significantly raises redox and polishes water to unparalleled clarity. Like HyperSorb , Purigen darkens progressively as it exhausts, and is easily renewed by treating with household bleach. Purigen is designed for both marine and freshwater use. A 100 mL bag of Purigen purifies and polishes up to 100 gallons of water for up to six months. | *$10.79 |
 | Purigen 500ml
Brand: Seachem
Seachem Purigen 500Ml | *$22.95 |
 | Reef Advantage Magnesium 1kg (2.2 lbs)
Brand: Seachem Part Number: SC637
Reef Advantage Magnesium is a concentrated (80,000 ppm) optimized blend of magnesium, chloride, and sulfate salts designed to restore depleted levels of magnesium with minimal impact to the ionic ratios found in natural sea water. Contains no ammonia! This is a common contaminant in every liquid magnesium supplement on the market. Severely depleted levels of magnesium (below 800 mg/L) can cause depressed pH levels and an inability to maintain proper calcium levels. Treats up to 4,000 gallons of water. | *$10.99 |
 | Reef Plus 2L (2.1 qt)
Brand: Seachem Part Number: 538
Reef Plus is a full spectrum reef supplement containing trace elements, vitamins, and amino acids demonstrated to have a positive impact on the growth of corals and other desirable reef creatures. Reef Plus is formulated to provide nutrients available from natural tropical reef waters. Contains vitamin B12, vitamin C, thiamine, inositol, choline, iodide, and other essential constituents at pH 8.3. Reef Plus is nitrate/phosphate free. 500 mL treats 200 gallons. | *$26.85 |
 | Seachem Acid Buffer 300 g
Brand: Seachem Part Number: 000116024600
Seachem Acid Buffer is a non-phosphate buffer to lower pH and buffer with Alkaline Buffer. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer lowers pH and buffers between 5.0 and 8.0 when used with Alkaline Buffer. As Acid Buffer lowers pH it converts carbonate alkalinity (KH) into available CO2. It may also be used to safely lower pH in marine water. A 300 g bottle treats over 900 gallons. | *$6.29 |
 | SEACHEM ALERT MONITOR PH
Brand: Seachem Part Number: SCL00200
pH Alert is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.6. Freshwater Only. DIRECTIONS: Simply place pH Alert visibly anywhere in the aquarium or filter. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes. The life of the pH Alert sensor may vary depending on a variety of tank parameters. A replacement sensor is included to ensure effectiveness for 3 to 6 months. Sensor exhaustion is indicated by a visible fading or washing out of sensor color.To apply replacement sensor, first peel exhausted sensor from reference card. With tweezers, remove the paper backing from the new sensor to reveal adhesive. Apply new sensor to reference card. Press it firmly. Avoid touching sensor surface with fingers. | *$6.42 |
 | Seachem AquaZole (Metronidazole) 10g
Brand: Seachem Part Number: 000116072205
AquaZole is a metronidazole-based medication for both freshwater and marine fish. It is effective against Cryptocaryon, Hexamita, Ichthyophthirius and other external parasites. There is little danger of overdosing with AquaZole. It can be substituted for metronidazole. A 10 g vial treats up to 200 gallons. Marine and freshwater use. | *$4.92 |
 | Seachem Cichlid Lake Salt 1.5lb
Brand: Seachem Part Number: 000116027304
Seachem?s Cichlid Lake Salt? is a chemically sound blend of salts designed to replicate the natural environment of cichlids. It contains all physiologically essential elements such as magnesium, calcium, sodium, potassium, and includes trace components such as iron, aluminum, and iodide. It does not contain harmful or unnecessary ingredients such as nitrates, phosphates, arsenic, lithium, or cadmium. Use Seachem?s Cichlid Trace? to restore and maintain important trace elements between water changes. Guaranteed Analysis: Magnesium (Mg): 11.83%; Potassium (K): 10.08%; Sodium (Na): 3.53%; Calcium (Ca): 3.24%; Aluminum (Al):0.09%; Iron (Fe): 0.02%; Iodide (I): 0.002%DIRECTIONS: All doses given for 40 L (10 gallons*). TANGANYIKA: Use 11 g (1.5 teaspoons). MALAWI: Use 5.5 g (3/4 teaspoons). VICTORIA: Use 3.6 g (1/2 teaspoon). pH BUFFERING: Seachem?s Tanganyika Buffer? (pH 9.0?9.4) and Malawi/Victoria Buffer? (pH 7.8?8.4) should be used to adjust carbonate hardness and pH. TIPS: Use when setting up an aquarium and when making water changes. To add salt to an established tank, base dose on water being changed. Do not use salt when simply replacing evaporated water. It is best to dissolve the salt in freshwater before use.i700 g / 1.5 lbs (Treats 8000 L (2115 US Gallons)) | *$9.96 |
 | Seachem CupriSorb 250 mL
Brand: Seachem Part Number: 000116020602
SeaChem CupriSorb is a powerful adsorbent of copper and heavy metals. CupriSorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper from water and, if in continuous use, from the gravel/substrate bed as well. CupriSorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates. A 250 mL container is adequate for up to 150 gallons and removes over 3,000 mg of copper or 12 ppm in 150 gallons. It may be regenerated repeatedly. Marine or freshwater use. | *$15.00 |
 | Seachem Entice 250mL
Brand: Seachem Part Number: 000116142601
Entice is an all natural scent and flavor enhancer for finicky eaters. Simply soak any food item in Entice to attract the interest of finicky eaters. Ideal for all marine and freshwater fish. Sizes: 250 mL, 500 mL DIRECTIONS: Briefly soak food prior to feeding or add 1 or 2 capfuls directly to aquarium in the same location in which food was just added. Shake well before use. There is no danger of over use so use as liberally or sparingly as you find necessary. 250 mL is good for 50 feedings | *$5.76 |
 | Seachem Equilibrium 600g
Brand: Seachem Part Number: 000116044301
Equilibrium is specifically designed to establish the ideal mineral content for the planted aquarium. Equilibrium contains no sodium or chloride (which can be detrimental to a planted aquarium at elevated levels). Equilibrium is ideally suited for use with RO (reverse osmosis) or DI (deionized) water or any mineral deficient water. Equilibrium raises the essential mineral/electrolyte content (General Hardness) of the water to balance with and promote stability of the carbonate hardness. To maintain KH, we recommend Alkaline Buffer.DIRECTIONS: To raise mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16 g (1 tablespoon) for every 80 L (20 gallons*) when setting up an aquarium or when making water changes (add to new water). Equilibrium can be added straight, although for optimum solubility we recommend mixing with ~ 1 L (1 qt.) of water (the resulting mixture will have a white opaque appearance). When this mixture is added to the aquarium it will impart a slight haze that should clear within 1530 minutes. HINTS: Do not use Equilibrium when replacing evaporated water. This dose is based on DI or RO water; for other water, measure hardness (GH) first, then add according to need. Plant preferences vary, but a general guide is about 12 meq/L (36 dH) or match the existing or target carbonate hardness (KH), which, ideally, is also about 12 meq/L (36 dKH) | *$11.01 |
 | Seachem Flourish 10 Tab Pack
Brand: Seachem Part Number: 000116050500
Flourish Tabs are growth stimulating tablets for plant roots. They contain essential trace elements, amino acids, and vitamins. They are rich in iron, manganese, magnesium, calcium, potassium, inositol, choline B12, biotin, and other factors that have been determined to be beneficial to aquatic plant roots. They contain no phosphate or nitrate that would promote algae proliferation. Each pack of ten tablets treats a 12 X 30 inch plant bed twice. For best results, use in combination with Flourish.Sizes: 1 pack of 10 tablets (3 g each) Guarenteed Analysis Calcium: 20.0% Magnesium: 0.08% Sulfur: 35.0% Boron: 0.016% Chlorine: 0.00023% Cobalt: 0.00015% Copper: 0.00011% Iron: 2.8% Manganese: 0.11% Molybdenum: 0.0003% Sodium: 0.0005% Zinc: 0.00017% Aluminum: 0.00006% Vanadium: 0.00023% Rubidium: 0.0005% Iodine: 0.0006% Potassium: 0.0000018% Phosphorus: 0.03% Amino acids and chelates: 9.7% Nitrogen equivalent: 0.64% Other organic factors: 0.002% | *$7.55 |
 | Seachem Flourish Excel 250 mL
Brand: Seachem Part Number: 000116045605
Seachem Flourish Excel is a source of bioavailable organic carbon. All plants require a source of carbon. This is typically obtained from CO2, but, may also be derived from simple organic compounds (such as photosynthetic intermediates). Therefore, one can derive a substantial benefit with the use of Flourish Excel either alone or in conjunction with CO2 injection. Flourish Excel also has iron reducing properties which promote the ferrous state of iron (Fe+2), which is more easily utilized by plants than ferric iron (Fe+3). Flourish Excel is an integral component of Seachems plant products and is recommended for use with the entire Flourish line as well as our Flourite and Onyx Sand substrates. Contains no phosphate or nitrate. 250 mL will treat a 50 gallon tank for 1-2 months. | *$5.97 |
 | Seachem Flourish Iron 500 mL
Brand: Seachem Part Number: 000116047302
Flourish Iron is a highly concentrated (10,000 mg/L) ferrous iron (Fe+2) gluconate supplement. It should be used in those cases where the iron requirements exceed that which can be delivered by Flourish at the recommended dose or signs of iron deficiency appear (such as short and slender stems or yellowing between veins.) Plants are able to much more easily derive a benefit from Flourish Iron than from EDTA-iron sources because all EDTA iron is in the ferric (Fe+3) state. Since plants require iron in the ferrous state, additional physiological energy must be expended in order to extract the ferric iron from EDTA-iron and then convert it to the ferrous form. Contains no phosphate or nitrate.DIRECTIONS: Use 1 capful (5 mL) for each 200 L (50 gallons*) or as required to maintain about 0.10 mg/L iron. For smaller doses please note that each cap thread is about 1 mL. Use MultiTest: Iron test kit to monitor iron concentrations. Use as needed to combat signs of iron deficiency (usually seen in new growth) which include: chlorosis (yellowing) of tissue between veins and short and slender stems. | *$9.44 |
 | Seachem Flourish Nitrogen 500 mL
Brand: Seachem Part Number: 000116062305
Nitrogen is one of the main three macro nutrients (nitrogen, phosphorus, potassium: NPK) required by plants and can often become the limiting factor to growth in a nourishing system. Flourish Nitrogen is a concentrated (15,000 mg/L) blend of nitrogen sources. It provides nitrogen in both the nitrate form and the plant-preferred ammonium form. However, no free ammonia is released because the ammonium in Flourish Nitrogen is complexed and unavailable until utilized by the plants. Flourish Nitrogen also provides nitrate for those plants that can readily utilize nitrate as well. For maximum benefit use with Flourish Phosphorus and Flourish Potassium.DIRECTIONS: BEGINNER: Use 2.5 mL (half a cap) for each 160 L (40 gallons*) twice a week or as needed in response to signs of nitrogen deficiency (e.g. stunted growth, chlorosis). For smaller doses, please note that each cap thread is approximately 1 mL. EXPERT: The beginner dose raises nitrogen by the same degree that 1 mg/L nitrate would. This dose is sufficient to provide approximately 4 g of growth (dry) or about 20 g (hydrated) over a 1 month period (assuming all other necessary nutrients are provided). For increased growth use proportionately more. To target a specific nitrogen increase, dose according to the following formula: 0.25vn=m, where v= volume of tank in gallons*, n=desired nitrogen increase (if using a nitrate equivalent value for n then use a factor of 0.05 instead of 0.25 in the formula) and m=volume of product to use in mL. For example to raise 20 gallons* by 0.20 mg/L nitrogen you would use: 0.25*20*0.20=1 mL.Because one-half of the nitrogen in Flourish Nitrogen is from nitrate you can get a reasonable estimate of nitrogen levels by doubling a nitrate reading, or, you can use Seachems MultiTest: Total Nitrogen (coming soon!) to accurately measure total nitrogen while distinguishing between nitrate, ammonia and organic nitrogen. | *$9.44 |
 | Seachem Flourish Potassium 250 mL
Brand: Seachem Part Number: 000116046602
Seachem Flourish Potassium contains 50,000 mg/L of potassium suitable for the natural planted aquarium. Potassium is one of several elements that are vitally important to maintaining a vigorous level of growth in a planted aquarium. Potassium can become depleted in a rapidly growing system or when the source water has a low mineral content. In these cases potassium could become the limiting factor to growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth. | *$5.97 |
 | Seachem Flourish Potassium 500 mL
Brand: Seachem Part Number: 000116046305
Flourish Potassium contains 50,000 mg/L of potassium suitable for the natural planted aquarium. Potassium is one of several elements that are vitally important to maintaining a vigorous level of growth in a planted aquarium. Potassium can become depleted in a rapidly growing system or when the source water has a low mineral content. In these cases potassium could become the limiting factor to growth. Use Flourish Potassium to prevent potassium depletion (signs of which include yellowing in older leaves) and maintain the highest level of growth.DIRECTIONS: Use 1 capful (5 mL) for every 125 L (30 gallons*). This dose raises potassium by 2 mg/L. Repeat 23 times per week or as needed (in response to signs of potassium deficiency in older leaves which includes: chlorosis (yellowing), necrosis (death/browning), and weak stems and roots. | *$9.44 |
 | Seachem Flourite Black 7kg / 15.4lbs
Brand: Seachem Part Number: 000116372503
Flourite is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any aquarium environment. Flourite is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels. Gravel modifiers such as laterite are not necessary. Flourite is not chemically coated or treated and will not alter the pH of the water. Although pre-washed, it should be rinsed before use to remove residual dust. Dust can also be minimized by filling tank slowly and dispersing water so that the Flourite bed is not disturbed. Slight initial cloudiness is normal and will clear rapidly (212 hours). This bag is sufficient for about a 5 cm (2 inch) deep bed in a typical 40 L (10 gallon) tank. Recommended use is 1 kg (2 lbs) for approximately each 200 cm2 (31 in2) of tank bottom at a depth of 5 cm (2 in).Although planted aquariums are often considered to be too difficult for the beginning hobbyist, we believe that planted aquaria are actually ideal for the beginner. With the right substrate the beginner can have a successful aquarium with a minimum of maintenance. As the beginner becomes more comfortable in the hobby they will feel inclined to experiment a bit and thus build on the solid foundation they have already established.It won`t always be necessary to dose your aquarium with each of the products in the Flourish line, but as an example, we have developed one possible dosing regimen using all of our plant products. This is by no means the only way to dose your aquarium; it is merely a suggestion. Your dosing regimen will depend greatly on a variety of factors, including lighting, initial water quality, how heavily stocked your aquarium is, substrate selection, and types of plants; so don`t be surprised if getting the results you want takes a little experimentation.Concentrati | *$21.83 |
 | Seachem Flourite Black Sand 7kg / 15.4lbs
Brand: Seachem Part Number: 000116352505
Flourite is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any aquarium environment. Flourite is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels. Gravel modifiers such as laterite are not necessary. Flourite is not chemically coated or treated and will not alter the pH of the water. Although pre-washed, it should be rinsed before use to remove residual dust. Dust can also be minimized by filling tank slowly and dispersing water so that the Flourite bed is not disturbed. Slight initial cloudiness is normal and will clear rapidly (212 hours). This bag is sufficient for about a 5 cm (2 inch) deep bed in a typical 40 L (10 gallon) tank. Recommended use is 1 kg (2 lbs) for approximately each 200 cm2 (31 in2) of tank bottom at a depth of 5 cm (2 in).Although planted aquariums are often considered to be too difficult for the beginning hobbyist, we believe that planted aquaria are actually ideal for the beginner. With the right substrate the beginner can have a successful aquarium with a minimum of maintenance. As the beginner becomes more comfortable in the hobby they will feel inclined to experiment a bit and thus build on the solid foundation they have already established.It won`t always be necessary to dose your aquarium with each of the products in the Flourish line, but as an example, we have developed one possible dosing regimen using all of our plant products. This is by no means the only way to dose your aquarium; it is merely a suggestion. Your dosing regimen will depend greatly on a variety of factors, including lighting, initial water quality, how heavily stocked your aquarium is, substrate selection, and types of plants; so don`t be surprised if getting the results you want takes a little experimentation.Concentrati | *$20.21 |
 | Seachem Focus 5g
Brand: Seachem Part Number: 000116064101
Focus is an antibacterial polymer for internal infections of fish. It may be used alone or mixed with other medications to make them palatable to fish and greatly reduce the loss of medications to the water through diffusion. It can deliver any medication internally by binding the medication to its polymer structure. The advantage is that the fish can be medicated without contaminating the entire aquarium with medication. Fish find Focus appetizing and it may be fed to fish directly or mixed with frozen foods. Focus contains nitrofurantoin for internal bacterial infections. Marine and freshwater use. 5 gram container. | *$5.34 |
 | Seachem Garlic Guard 500 mL
Brand: Seachem Part Number: 000116017305
Seachem GarlicGuard is an appetite/flavor enhancer for freshwater and saltwater fish. Simply soak the food in Garlic Guard before feeding your fish. GarlicGuard will help renew the interest of poor or finicky eaters. GarlicGuard contains the naturally derived, active ingredient found in garlic, allicin, which has been demonstrated to possess health promoting benefits. Allicin possesses strong anti-oxidant properties (similar to Vitamin C) which promote enhanced health through elimination of dangerous free radicals. For enhanced health benefits, GarlicGuard also contains Vitamin C. Freshwater and Marine. Reef safe. | *$9.23 |
 | Seachem Marine Trace 250 mL
Brand: Seachem Part Number: 000116079600
Seachem Marine Trace supplies a broad range of trace elements demonstrated to be necessary for proper fish health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Marine Trace contains only those elements actually demonstrated to be required by fish.Directions: Use 5ml (1 capful) for every 20 gallons once or twice a week. | *$5.76 |
 | Seachem Multitest: Copper Test Kit
Brand: Seachem Part Number: 000116096607
SeaChem Multitest: Copper Test KitThis kit measures copper (all types) down to 0.01 mg/L in marine or freshwater. Uses a highly sensitive catalysis based procedure. multi-cavity plate for simultaneous testing of up to 6 tests at the same time catalysis based, sensitive to less than 0.01 mg/L includes reference for test validation marine or fresh water Range: 0.0 - 0.80 mg/L Precision: 0.0025 mg/L & 0.025 mg/L | *$13.32 |
 | Seachem Multitest: Marine Basic Test Kit
Brand: Seachem Part Number: 000116099004
SeaChem Multitest: Marine Basic Test KitThis kit combines the Marine pH & Alkalinity, Ammonia and Nitrite & Nitrate kits into one kit. (pH, alkalinity, free/total ammonia, nitrite, nitrate Multi Test Kit) | *$31.75 |
 | Seachem Multitest: Phosphate Test Kit
Brand: Seachem Part Number: 000116097000
SeaChem Multitest: Phosphate Test KitThis kit measures inorganic phosphate down to 0.05 mg/L, producing a unique easy to read yellow-green-blue color range in marine and freshwater. multi-cavity plate for simultaneous testing of up to 6 tests at the same time sensor based, sensitive to less than 0.05 mg/L includes reference for test validation marine or fresh water Range: 0.0 - 3.0 mg/L Precision: 0.001 - 0.1 mg/L | *$13.32 |
 | Seachem Multitest: Reef Special Test Kit
Brand: Seachem Part Number: 000116099202
SeaChem Multitest: Nitrite & Nitrate Test KitThis kit combines the Phosphate, Silicate, and Iodine/Iodide kits into one kit.(phosphate, silicate, iodide Multi Test Kit) multi-cavity plate for simultaneous testing of up to 6 tests at the same time includes reference for test validation Range: phosphate 0-3 mg/L, silicate 0-25mg/L, iodine/iodide 0-0.1 mg/L Precision: phosphate 0.001-0.1 mg/L, silicate 0.1-1 mg/L, iodine/iodide 0.0025-0.005 mg/L | *$33.38 |
 | Seachem Multitest: Silicate Test Kit
Brand: Seachem Part Number: 000116097604
SeaChem Multitest: Silicate Test KitThis kit measures silicates down to 0.5 mg/L in marine or freshwater. multi-cavity plate for simultaneous testing of up to 6 tests at the same time sensitive to less than 0.5 mg/L includes reference for test validation marine or fresh water Range: 0 - 25 mg/L Precision: 0.1 - 1 mg/L & 0.01 - 0.1 mg/L | *$13.32 |
 | Seachem Neutral Regulator
Brand: Seachem Part Number: 306
Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it. Neutral Regulator enhances and stabilizes the environment and benefits fish health. It contains pure phosphate buffers for pH control and conditioners for chlorine, chloramine and ammonia control. The use of Neutral Regulator makes other conditioning unnecessary. Contents treats 800 gallons. Freshwater use only. Directions: Use one level teaspoon for every 10 gallons once or twice a month (or a necessary to maintain a pH of 7.0). Neutral Regulator may be added directly to the aquarium at any time, but is better used when adding or changing water by predissolving it in the replacement water. 8.8 oz. treats 800 gallons. Aquarium use only. Keep away from children. | *$5.13 |
 | Seachem Neutral Regulator 250 g
Brand: Seachem Part Number: 000116030601
SeaChem Neutral Regulator adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia. The use of Neutral Regulator makes other conditioning unnecessary. To lower pH below 7.0 use Neutral Regulator with Acid Regulator (or Discus Buffer). To raise pH above 7.0 use with Alkaline Regulator. All of these products will enhance and stabilize the freshwater aquarium environment. Use Fresh Trace to restore the proper level of trace elements required by thriving, healthy freshwater community fish. A 250 g bottle treats over 800 gallons. Freshwater use only. | *$6.50 |
 | Seachem Nourish 100mL (3.4oz)
Brand: Seachem Part Number: 000116148504
Nourishis a comprehensive vitamin, amino acid, and trace element supplement developed to address nutritional requirements commonly associated with long term closed system housing of freshwater ornamental fish. Nourish contains potassium iodide in a heavy base of spirulina and chlorella. The nutrient iodine is essential for the biosynthesis of the thyroid hormones thyroxine and triiodothyronine.* Both spirulina and chlorella contain a rich assortment of amino acids and vitamins. Nourish can be used on marine ornamental fish; however, it is specifically designed for freshwater fish where a variety of thyroid related ailments are often encountered (especially among cichlids) | *$6.71 |
 | SEACHEM NUTRIDIET CANNED FRESH SHRIMP
Brand: Seachem Part Number: SCL10020
NutriDiet Naturals are the ideal solution for feeding a natural diet to fresh and saltwater fish. They are perfect for the aquarist seeking variety or an alternative to pelleted foods. Studies have shown that shrimp and mealworms can be used to condition a variety of fish for breeding. The unique packaging process of NutriDiet Naturals locks in moisture and nutrients making them more palatable and more nutritious than freeze-dried foods | *$4.13 |
 | Seachem PhosGuard 250 ml
Brand: Seachem Part Number: 000116018609
PhosGuard is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine or fresh water aquaria. Unlike competing products, PhosGuard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. PhosGuard has a working capacity to remove 20 to 60 mg/L phosphate in 100 gallons with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. PhosGuard will cause a decline in hair algae and enhance coral growth. Each liter treats up to 300 gallons. Marine or freshwater use. | *$5.87 |
 | Seachem Prime 250 mL
Brand: Seachem Part Number: 000116043601
Seachem Prime is the complete and concentrated conditioner for both fresh and salt water. Prime removes chlorine, chloramine and ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tanks biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Prime also promotes the production and regeneration of the natural slime coat. Prime is non-acidic and will not impact pH. Prime will not overactivate skimmers. Use at start-up and whenever adding or replacing water. A 250 mL bottle treats over 2,500 gallons, much more than competing products. Marine and freshwater. | *$7.86 |
 | Seachem Purigen 100mL Bag
Brand: Seachem Part Number: 000116016506
SeaChem Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others, even HyperSorb, by over 500%. Purigen; removes protiens, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Like HyperSorb, Purigen darkens progressively as it exhausts, and is easily renewed by treating with household bleach. A 100 mL bag of Purigen purifies and polishes up to 100 gallons of water for up to six months. Purigen is designed for both marine and freshwater use. | *$8.49 |
 | Seachem Purigen 250mL
Brand: Seachem Part Number: 000116016605
SeaChem Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others, even HyperSorb, by over 500%. Purigen; removes protiens, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Like HyperSorb, Purigen darkens progressively as it exhausts, and is easily renewed by treating with household bleach. A 100 mL bag of Purigen purifies and polishes up to 100 gallons of water for up to six months. Purigen is designed for both marine and freshwater use. | *$14.16 |
 | Seachem Reef Advantage Magnesium 1 kg
Brand: Seachem Part Number: 000116063708
SeaChem Reef Advantage Magnesium is a concentrated (80,000 ppm) optimized blend of magnesium, chloride, and sulfate salts designed to restore depleted levels of magnesium with minimal impact to the ionic ratios found in natural sea water. Reef Advantage Magnesium contains no ammonia! This is a common contaminant in every liquid magnesium supplement on the market. Severely depleted levels of magnesium (below 800 mg/L) can cause depressed pH levels and an inability to maintain proper calcium levels. Magnesium depletion is commonly associated with the use of kalkwasser. 1 kg treats 16,000 L (4,000 gallons). | *$11.54 |